.png?width=180&quality=75&format=webp){kind=logo}
Representative image of the Messmer's UV Plus 100 VOC - Gallon line. Packaging, size and piece count vary by the option you select below.
Messmer's UV Plus 100 VOC - Gallon
Available Options
Choose your preferred options and quantity below.
Gallon
M-UV100-1-SEQR
$57.95
per unit
M-UV100-1-NCED
$57.95
per unit
M-UV100-1-NAVR
$57.95
per unit
M-UV100-1-COBR
$57.95
per unit
M-UV100-1-LAKB
$57.95
per unit
M-UV100-1-OAKB
$57.95
per unit
M-UV100-1-NAT
$57.95
per unit
M-UV100-1-CHAR
$57.95
per unit
M-UV100-1-DWAL
$57.95
per unit
M-UV100-1-NRED
$57.95
per unit
M-UV100-1-OXBR
$57.95
per unit
M-UV100-1-CCGR
$57.95
per unit
M-UV100-1-MOAK
$57.95
per unit
M-UV100-1-DRFT
$57.95
per unit
M-UV100-1-NPF
$57.95
per unit
About this product
Messmer’s UV Plus 100 VOC is a premium, low-volatile penetrating oil finish engineered to protect exterior wood from UV radiation, moisture, and mildew. It is specifically formulated to meet strict environmental standards while providing a natural look that does not peel or blister. This finish is ideal for maintaining the aesthetic and structural integrity of decks, fences, and siding in highly regulated regions.
Manufacturer Specifications
- VOC Content
- < 100 g/L
- Coverage Rate
- 100 - 300 square feet per gallon depending on wood porosity
- Application Temperature
- 45°F to 90°F (7°C to 32°C)
- Flash Point
- 104°F (40°C)
- Clean-up
- Mineral spirits
- Drying Time
- 24 to 48 hours in normal conditions
Best used for
- 1Protecting exterior wood structures in VOC-restricted states like California and OTC regions.
- 2Finishing and maintaining cedar, redwood, or pressure-treated pine decks.
- 3Preserving vertical wood surfaces such as siding, fences, and shakes.
Pro tips for dense hardwoods
- For dense hardwoods, apply a very thin coat and strictly follow the 30-minute wipe-off rule to prevent the oil from becoming tacky or shiny.
- Ensure the wood moisture content is below 12% using a moisture meter to allow for maximum penetration of the oil.
- Avoid applying in direct, hot sunlight; heat can cause the oil to flash-dry on the surface before it has a chance to soak into the wood fibers.
Specifications
- Brand
- Messmer's
- Category
- Stains & Finishes
- Options available
- 15 sizes / package counts
Per-option details
| Option | SKU | Piece count | Dimensions | Weight |
|---|---|---|---|---|
| Gallon | M-UV100-1-SEQR | gallon | — | — |
| Gallon | M-UV100-1-NCED | gallon | — | — |
| Gallon | M-UV100-1-NAVR | gallon | — | — |
| Gallon | M-UV100-1-COBR | gallon | — | — |
| Gallon | M-UV100-1-LAKB | gallon | — | — |
| Gallon | M-UV100-1-OAKB | gallon | — | — |
| Gallon | M-UV100-1-NAT | gallon | — | — |
| Gallon | M-UV100-1-CHAR | gallon | — | — |
| Gallon | M-UV100-1-DWAL | gallon | — | — |
| Gallon | M-UV100-1-NRED | gallon | — | — |
| Gallon | M-UV100-1-OXBR | gallon | — | — |
| Gallon | M-UV100-1-CCGR | gallon | — | — |
| Gallon | M-UV100-1-MOAK | gallon | — | — |
| Gallon | M-UV100-1-DRFT | gallon | — | — |
| Gallon | M-UV100-1-NPF | gallon | — | — |
Piece counts and dimensions are as supplied by the manufacturer for each package option.
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455