1x4 Massaranduba Tongue & Groove Soffit

A 1x4 Massaranduba board weighs approximately 1.28 lbs per linear foot. Massaranduba has a density of about 69 lbs/ft³, making it one of the densest commercially available hardwoods. A 12-foot 1x4 Massaranduba board weighs approximately 15 lbs. Always factor weight into your structural and shipping calculations.

1x4 Massaranduba soffit has an expected service life of up to 50+ years when properly installed. This is 3-5× longer than pressure-treated pine and 2-3× longer than cedar. Massaranduba achieves this exceptional longevity through its 3,190 Janka hardness and Class 1 durability rating, providing built-in resistance to rot, decay, insects, and fungal growth without chemical preservatives.

1x4 Massaranduba soffit pricing varies by profile, grade, and board length. Select and Better grade boards typically range from $4-$12 per linear foot before shipping. While the upfront cost is higher than pressure-treated lumber, Massaranduba's up to 50+-year service life makes the lifetime cost per year significantly lower. Use the configurator above for exact pricing, or request a custom quote for large orders.

Yes — 1x4 Massaranduba wood soffit outperforms composite in hardness (3,190 vs ~200 Janka), lifespan (up to 50+ years vs 25-30 years), and heat resistance. Unlike composites, Massaranduba won't melt, warp in extreme heat, or fade significantly. While initial cost is similar ($8-15/LF installed), Massaranduba wood decking costs less over its much longer lifetime. Composites do offer lower upfront maintenance, but Massaranduba's natural beauty and durability make it the superior long-term investment.

Massaranduba is widely considered one of the best woods for 1x4 soffit boards. With a 3,190 Janka hardness rating, Class A fire-rated certification, and up to 50+-year lifespan, Massaranduba (Brazilian Redwood) outperforms nearly every other commercially available wood species. Other excellent options include Cumaru (Brazilian Teak) and Massaranduba (Brazilian Redwood), but Massaranduba remains the industry benchmark for premium outdoor hardwood applications.

Massaranduba requires minimal maintenance. Without treatment, it naturally weathers to an elegant silver-gray patina over 6-12 months. To maintain the original warm brown color, apply a UV-inhibiting penetrating oil (like Ipe Oil or Penofin) once or twice annually. Cleaning involves periodic washing with a mild soap solution. No sanding, staining, or sealing is required for structural durability.

Massaranduba is DIY-friendly with proper preparation. Key requirements: (1) Always pre-drill all screw holes — Massaranduba is too hard for direct screwing. (2) Use only 305 or 316 stainless steel fasteners — standard hardware will corrode and stain. (3) Face-screw with stainless steel trim-head screws. (4) Allow boards to acclimate on-site for 5-7 days before installation. A compound miter saw with a carbide-tipped blade is recommended.

A nominal 1x4 Massaranduba board has actual finished dimensions of 0.75" × 3.5" (19.0 x 88.9 mm). The "1x4" is the nominal (rough-cut) size — after kiln drying and precision surfacing, all hardwood lumber finishes slightly smaller. This is standard across the lumber industry, similar to how a nominal 2×4 softwood measures 1.5" × 3.5". Always use the actual dimensions (0.75" × 3.5") when calculating material quantities and coverage for your project.

We responsibly, legally, and ethically source all our Massaranduba. We work only with suppliers who follow responsible forestry practices with full chain-of-custody transparency. Note: We are not FSC certified. Massaranduba trees grow naturally in diverse tropical forests and regenerate well under managed harvest. The extremely long lifespan (up to 50+ years) means fewer replacements compared to softwood or composite alternatives, reducing long-term environmental impact.