.png?width=180&quality=75&format=webp){kind=logo}
Superdeck Transparent Stain - 5 Gallon
The five-gallon pail of Superdeck 1900 Series Transparent Stain delivers economical coverage for larger exterior wood projects. This transparent wood finish lets the natural grain and texture shine while adding a protective layer against UV and moisture. Available in 11 colors. Limited availability—contact the seller to confirm stock before placing your order. Ideal for decks, fences, siding, and log homes requiring a clear, natural-look finish.
Available Options
Choose your preferred options and quantity below.
5 Gallon
SD-TRANS-5
$269.95
per unit
About this product
Superdeck Transparent Stain is a professional-grade, oil-based finish formulated to protect and enhance the natural character of premium hardwoods. It uses a blend of Linseed and Tung oils to penetrate dense grains, providing a moisture barrier and UV protection without obscuring the wood's unique grain pattern. This 5-gallon container is designed for large-scale residential and commercial projects where consistent color and long-lasting durability are required.
Manufacturer Specifications
- Base Material
- Oil-based (Linseed and Tung Oil blend)
- Coverage Rate
- 100–300 square feet per gallon depending on wood porosity
- VOC Content
- Available in 250 g/L and 100 g/L formulas to meet regional regulations
- Drying Time
- 24 to 48 hours for foot traffic depending on temperature and humidity
- Application Temperature
- 50°F to 90°F (10°C to 32°C)
- Cleanup
- Mineral spirits
Best used for
- 1Protecting Ipe and Cumaru decking on coastal boardwalks where exposure to salt air and high UV is constant.
- 2Maintaining the vibrant color and structural integrity of Tigerwood or Garapa rainscreen siding installations.
- 3Finishing Massaranduba rooftop decks to prevent checking and warping in high-heat, direct sunlight environments.
- 4Treating Red Balau fencing to enhance its deep red tones while providing a durable water-resistant barrier.
Pro tips for dense hardwoods
- On dense hardwoods like Ipe, apply one thin coat and strictly wipe off any excess stain after 15–20 minutes to prevent a tacky surface.
- Ensure the wood moisture content is below 15% before application to allow the oils to penetrate the tight grain properly.
- Clean the surface with a wood cleaner and brightener even on new wood to open the pores of the hardwood for better oil absorption.
- Avoid applying in direct midday sunlight, as the stain will dry too quickly on the surface and fail to penetrate the wood fibers.
Specifications
- Brand
- Superdeck
- Category
- Stains & Finishes
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455