Ipe Woods USA Logo
Representative image of Penofin Red Label Stain - Gallon by Penofin — not the actual product photo

Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.

Penofin
Stains & Finishes

Penofin Red Label Stain - Gallon

Penofin Ultra Premium Red Label is the top-of-the-line exterior penetrating oil finish, formulated with sustainably harvested Brazilian Rosewood Oil that soaks into wood fibers far deeper than competing stains. Designed for maximum performance in harsh weather—rain, wind, snow, and high-elevation UV—Red Label provides 99% UV protection with extra transoxide pigments and high-grade mildewcide to prevent mold and mildew growth. Works on all wood species, both softwood and hardwood. Semi-transparent finish preserves the freshly-milled look. Coverage: 175–300 sq. ft. per gallon on softwoods, ~400 sq. ft. on hardwoods. Apply with brush, pad, or sprayer. 250 VOC compliant in all 50 states.

Available Options

Choose your preferred options and quantity below.

1 Gallon

PE-REDLABEL-1

$52.99

per unit

About this product

Penofin Red Label is an Ultra Premium wood finish formulated with a Brazilian Rosewood Oil base designed to penetrate deep into the dense fibers of tropical hardwoods. It provides 99% UV protection and utilizes high-grade transoxide pigments to maintain the natural color of premium wood while preventing silvering. This stain is specifically engineered to handle the environmental stresses of high-moisture areas and intense sunlight, making it a professional choice for high-end residential and commercial outdoor structures.

Formulated with Brazilian Rosewood Oil for superior penetration into high-density wood species.
Provides 99% ultraviolet protection to mitigate sun damage and maintain natural wood color.
Contains added mildewcide to resist mold and mildew growth in humid or coastal environments.
Designed for a simple one-coat application process that enhances grain definition without surface filming.
Low VOC formula compliant with most environmental regulations while maintaining professional-grade durability.

Manufacturer Specifications

Base Material
Brazilian Rosewood Oil
UV Protection
99%
VOC Content
Less than 250 g/L
Coverage Rate
175 to 300 square feet per gallon
Application Temperature
45°F to 80°F
Drying Time
24 to 48 hours for foot traffic
Pigment Type
Transoxide

Best used for

  • 1Restoring and maintaining the rich, dark tones of an Ipe rooftop deck exposed to intense, all-day sun.
  • 2Protecting Garapa or Gold Cumaru rainscreen siding from moisture-induced checking and graying in coastal environments.
  • 3Providing a slip-resistant, UV-protected finish for Massaranduba boardwalks or heavy-traffic pool surrounds.
  • 4Enhancing the unique contrasting grain patterns of Tigerwood fencing and gates to prevent silvering while allowing the wood to breathe.

Pro tips for dense hardwoods

  • Always wipe off excess oil within 20 to 30 minutes of application; dense hardwoods like Ipe cannot absorb surplus material, and failure to wipe will result in a tacky, non-drying surface.
  • Ensure wood moisture content is below 15% before application to ensure the Rosewood oil can properly penetrate the tight grain of tropical species.
  • Avoid applying in direct sunlight or when the wood surface is hot to the touch, as the oil may dry too quickly on the surface before it can penetrate the wood fibers.

Specifications

Brand
Penofin
Category
Stains & Finishes

Why Choose Stains & Finishes?

UV protection
Deep penetration
Won't peel or crack
Enhances natural grain

How to Finish Exotic Hardwood Decking

1

Wait for Acclimation

Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.

2

Clean and Brighten

Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.

3

Apply Penetrating Oil

Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.

4

Seal All End Cuts

End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.

Pro Tip from Our Deck Specialists

Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.

Stains & Finishes — Common Questions

Frequently Bought Together

Accessories that pair well with stains & finishes for a complete installation.

Ships Nationwide

Fast LTL freight delivery

Quality Guaranteed

Professional-grade products

In Stock

Ready to ship today

Expert Support

Call 1-844-674-4455

Need Help Choosing the Right Accessory?

Our deck specialists have installed thousands of hardwood decks and can recommend the exact accessories for your project, species, and climate.