.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Penofin Architectural - Gallon - TMF Matte Finish
Penofin Architectural TMF (Translucent Matte Finish) is a high-end penetrating oil finish designed for architectural-grade wood applications. Delivers a refined matte appearance that showcases wood's natural texture and color depth without surface gloss. Built with Brazilian Rosewood Oil for deep penetration, UV protection, and moisture defense. Ideal for premium exterior projects where a sophisticated, low-sheen aesthetic is desired—siding, timber frames, custom decks, and architectural details.
Available Options
Choose your preferred options and quantity below.
1 Gallon
PE-ARCH-TMF-1
$59.99
per unit
About this product
Penofin Architectural TMF (Transparent Matte Finish) is a premium penetrating oil formulated specifically to nourish and protect the world's densest tropical hardwoods. It utilizes a Brazilian Rosewood oil base to penetrate deep into tight-grained species like Ipe and Cumaru, providing a natural matte look without the plastic-like sheen of traditional coatings. This finish is designed for high-end residential and commercial projects where maximum UV protection and a non-film-forming surface are required.
Manufacturer Specifications
- Base Material
- Brazilian Rosewood Oil
- VOC Content
- < 100 g/l
- Coverage Rate (Hardwoods)
- 175 - 300 sq. ft. per gallon
- Dry Time
- 24 hours for foot traffic
- Application Temp
- 45°F to 80°F
- Clean-up
- Mineral spirits
- Finish
- Transparent Matte
Best used for
- 1Protecting Ipe or Massaranduba rooftop decks from extreme UV exposure and moisture-driven checking.
- 2Maintaining the distinct color and grain patterns of Tigerwood or Garapa siding without adding artificial gloss.
- 3Finishing Cumaru or Red Balau boardwalks and docks where a breathable, non-slip matte surface is essential for safety.
- 4Treating tropical hardwood fencing and privacy screens to ensure dimensional stability in changing weather conditions.
Pro tips for dense hardwoods
- Due to the extreme density of Ipe and Cumaru, you must wipe off all excess oil within 20 to 30 minutes to prevent a tacky surface.
- Avoid applying in direct sunlight or on hot wood, as this causes the oil to dry too quickly before it can penetrate the grain.
- Always clean the wood with a specialized hardwood cleaner before application to open the pores and ensure even absorption.
Specifications
- Brand
- Penofin
- Category
- Stains & Finishes
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455