.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Ready Seal - Pecan 115 - 1 Gallon
Ready Seal Pecan delivers a warm, medium-brown tone to any exterior wood surface. This semi-transparent, oil-based stain-and-sealer-in-one features the brand's signature goof-proof formula—no back brushing needed, no lap marks, no streaks. Apply by brush, roller, or sprayer at any temperature. Provides deep-penetrating protection against moisture, mold, mildew, and UV damage. Suitable for decks, fences, pergolas, outdoor furniture, and all exterior wood projects. Coverage: ~125 sq. ft. per gallon. Color: Pecan 115.
Available Options
Choose your preferred options and quantity below.
1 Gallon
READY-SEAL-PECAN-1GL
$44.98
per unit
About this product
Ready Seal Pecan 115 is a professional-grade, oil-based semi-transparent stain and sealer designed to simplify the maintenance of premium wood surfaces. Its unique penetrating formula eliminates common application issues like lap marks, runs, and streaks, providing a consistent golden-brown finish. This product is specifically engineered for users who require a high-performance, breathable barrier that will not peel or chip over time.
Manufacturer Specifications
- Color
- Pecan 115
- Chemistry
- Oil-based (Paraffin)
- VOC Content
- < 250 g/L
- Average Coverage
- 125 - 175 sq. ft. per gallon
- Dry Time
- 48 - 72 hours
- Application Temperature
- No minimum (above freezing)
- Clean-up
- Mineral Spirits
Best used for
- 1Protecting Garapa decking to enhance its natural honey-gold hues while preventing premature graying.
- 2Sealing Tigerwood siding to darken the light-colored sapwood and create a more uniform, rich appearance.
- 3Maintaining Massaranduba rooftop decks where the ease of spray-and-walk application reduces labor in difficult access areas.
- 4Refreshening weathered Ipe or Cumaru boardwalks without the need for intensive sanding between maintenance coats.
Pro tips for dense hardwoods
- Dense tropical hardwoods have limited absorption; apply light coats and use a rag to wipe away any excess oil that hasn't penetrated after 15 minutes to prevent a tacky finish.
- Ensure the hardwood moisture content is 12% or less; dense species like Ipe will reject the oil if even slight internal moisture is present.
- For new tropical hardwood, consider using a wood brightener or light sanding (80-grit) to open the tight grain structure before applying Pecan 115 for maximum penetration.
Specifications
- Brand
- Other
- Category
- Stains & Finishes
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455