.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Messmer's Caribbean Extreme Teak Oil - Gallon
Messmer's Caribbean Extreme Teak Oil Finish is a specialty exterior wood treatment designed to protect and condition exotic hardwoods like Teak, Mahogany, and other tropical species. Engineered with triple UV protection featuring three distinct UV absorbers and stabilizers, this formula stands up to the most intense sun exposure. Deeply penetrates dense wood fibers to nourish, preserve, and enhance natural beauty. Perfect for outdoor furniture, marine applications, and hardwood decking in high-UV environments.
Available Options
Choose your preferred options and quantity below.
1 Gallon
M-CARIB-1
$59.99
per unit
About this product
Messmer’s Caribbean Extreme is a high-solids penetrating oil finish engineered specifically for dense tropical hardwoods in regions with intense solar exposure. It solves the problem of rapid graying and drying out in high-UV climates by providing a higher concentration of UV-blocking pigments and stabilizers than standard hardwood oils. This product is intended for professionals and homeowners maintaining premium wood surfaces like Ipe, Cumaru, and Tigerwood in harsh environments.
Manufacturer Specifications
- Coverage Rate
- 200 - 300 square feet per gallon on hardwoods
- VOC Content
- Less than 250 g/L
- Application Temperature
- 50°F to 90°F
- Dry Time
- 24 to 48 hours
- Cleanup
- Mineral spirits
Best used for
- 1Protecting Ipe rooftop decks in coastal or tropical environments with maximum UV exposure.
- 2Maintaining the rich color and structural stability of Cumaru pool decking and boardwalks.
- 3Finishing Tigerwood or Garapa siding to prevent silvering in high-sun exposure areas.
- 4Applying to Massaranduba or Red Balau fencing to stabilize wood against moisture and sun.
Pro tips for dense hardwoods
- Always wipe off all unabsorbed oil within 30 minutes of application to prevent a sticky, film-like finish that can peel.
- Ensure the wood moisture content is below 12% and the surface has been cleaned with a wood brightener to open the grain for maximum oil uptake.
- Avoid applying in direct sunlight or when the wood surface is hot to prevent the oil from flash-drying before it can fully penetrate.
Specifications
- Brand
- Messmer's
- Category
- Stains & Finishes
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455