.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Smooth Hardwood Plug – Massaranduba, 350 Ct.
Pack of 350 smooth 3/8" Massaranduba hardwood plugs. Tapered profile seats securely for a flat, polished appearance. Ideal for mid-size deck projects and renovations.
Available Options
Choose your preferred options and quantity below.
Standard
PLUGS-MAS-350
$62.06
per unit
About this product
DeckWise Smooth Hardwood Plugs in Massaranduba are precision-cut wood fasteners designed to conceal face-screws in tropical hardwood decking and siding. These 3/8-inch plugs solve the aesthetic challenge of visible hardware by providing a color-matched, flush finish for high-end Massaranduba installations. They are specifically intended for contractors and DIYers who require a seamless, professional look on stairs, perimeter boards, and vertical surfaces.
Manufacturer Specifications
- Material
- Kiln-dried Massaranduba (Manilkara bidentata)
- Plug Diameter
- 3/8 inch (9.5mm)
- Plug Style
- Smooth, slightly tapered
- Quantity
- 350 pieces per bag
- Compatibility
- Fits 3/8-inch countersunk holes in hardwood boards
- Finish
- Unfinished, natural hardwood
Best used for
- 1Concealing face-fasteners on Massaranduba perimeter boards and picture-frame borders where hidden clips are not applicable.
- 2Finishing Massaranduba stair treads and riser installations to ensure a smooth surface free of snagging hardware.
- 3Plugging countersunk holes on Massaranduba rainscreen siding or vertical fencing for a completely fastener-free architectural appearance.
- 4Reinforcing repairs on Massaranduba boardwalks or docks where heavy-duty face-screwing is required for structural stability.
Pro tips for dense hardwoods
- Align the grain of the plug with the grain of the decking board before tapping it in to make the fastener virtually invisible after sanding.
- Apply a small drop of exterior-grade waterproof glue, such as Titebond III, to the side of the plug before insertion to prevent pop-outs during extreme temperature shifts.
- Use a flush-cut saw or a sharp chisel to remove the excess plug height rather than sanding it down entirely; this prevents heat damage and 'burn marks' on the surrounding wood surface.
- Ensure the plug is fully seated and the glue is cured before applying a UV-inhibiting hardwood oil finish to the entire deck.
Specifications
- Brand
- DeckWise
- Category
- Plugs & Plug Kits
Why Choose Plugs & Plug Kits?
How to Plug a Hardwood Deck
Countersink the Screw
Use a 3/8″ countersink bit to create a flat-bottomed hole roughly 1/4″ deep. The screw sits at the bottom; the plug fills the remaining space.
Apply Exterior Adhesive
Put a small bead of waterproof polyurethane glue (included in kits) into the hole. Too much glue squeezes out and creates a mess; too little and the plug loosens over time.
Seat the Plug
Tap the plug in with a rubber mallet or wood block until it seats against the glue. Ribbed plugs self-center and grip irregular holes; smooth plugs work best in precision-drilled holes.
Flush-Cut After Curing
Wait 24 hours for the adhesive to cure fully, then trim the plug flush with a sharp chisel or oscillating multi-tool. Sand lightly and apply finish.
Pro Tip from Our Deck Specialists
Order plugs cut from the same species AND the same board lot as your decking for the closest color and grain match. Plugs from a different harvest can look noticeably different.
Plugs & Plug Kits — Common Questions
Frequently Bought Together
Accessories that pair well with plugs & plug kits for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455