.png?width=140&quality=70){kind=logo}
Stains & Finishes
Protect and enhance your hardwood deck with penetrating oil finishes and sealers
UV Protection
Trans-oxide pigments block UV damage and prevent graying
Deep Penetration
Oil-based formulas soak into dense hardwood fibers
Won't Peel
Penetrating finishes never crack, peel, or flake
Exotic hardwoods benefit from penetrating oil finishes that protect from within rather than forming a surface film. Our selection includes Ipe Oil® and Messmer's UV Plus formulas specifically engineered for dense tropical hardwoods, plus end sealers and cleaners for complete deck care.
Showing 66 products
All Accessories
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455