.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Smooth Hardwood Plug – Ipe, 1750 Ct.
Contractor bulk pack of 1,750 smooth 3/8" Ipe hardwood plugs. Tapered design for effortless installation and a seamless deck surface. Best suited for high-volume or commercial projects.
Available Options
Choose your preferred options and quantity below.
Standard
PLUGS-IPE-1750
$281.48
per unit
About this product
The DeckWise Ipe Smooth Hardwood Plug kit is a professional-grade solution for concealing face-fastened screws in high-end tropical hardwood projects. These 3/8-inch tapered plugs are designed to be glued into countersunk holes, providing a seamless finish that protects fasteners from moisture while maintaining the unbroken aesthetic of the wood grain. This bulk 1750-count pack is specifically intended for large-scale residential decks, commercial boardwalks, and siding installations.
Manufacturer Specifications
- Material
- Genuine Ipe Hardwood
- Quantity
- 1750 count
- Diameter
- 3/8 inch (9.525mm)
- Profile
- Tapered sides with smooth top
- Moisture Content
- Kiln-dried to 10-12%
- Compatibility
- Designed for Ipe decking, siding, and outdoor furniture
Best used for
- 1Concealing fasteners on the perimeter 'picture frame' boards and stair treads of Ipe decks where hidden fasteners are not applicable.
- 2Finishing Ipe rainscreen siding installations to create a fastener-free architectural facade.
- 3Securing Ipe boards on heavy-traffic commercial boardwalks or public docks where exposed screw heads may pose a snagging hazard.
- 4High-end outdoor furniture construction using Ipe to hide internal joinery hardware and prevent corrosion from salt air exposure.
Pro tips for dense hardwoods
- Align the grain of the plug with the grain of the decking board before tapping it home to make the plug nearly invisible after sanding.
- Apply a small drop of waterproof exterior wood glue (such as Titebond III) to the side of the plug to ensure it remains seated during seasonal wood expansion and contraction.
- Use a sharp flush-cut saw or a belt sander to remove excess material once the glue has dried, rather than trying to drive the plug perfectly flush with a hammer.
- Apply a UV-protectant hardwood oil to the plugs immediately after sanding to prevent the end-grain of the plug from absorbing moisture or graying prematurely.
Specifications
- Brand
- DeckWise
- Category
- Plugs & Plug Kits
Why Choose Plugs & Plug Kits?
How to Plug a Hardwood Deck
Countersink the Screw
Use a 3/8″ countersink bit to create a flat-bottomed hole roughly 1/4″ deep. The screw sits at the bottom; the plug fills the remaining space.
Apply Exterior Adhesive
Put a small bead of waterproof polyurethane glue (included in kits) into the hole. Too much glue squeezes out and creates a mess; too little and the plug loosens over time.
Seat the Plug
Tap the plug in with a rubber mallet or wood block until it seats against the glue. Ribbed plugs self-center and grip irregular holes; smooth plugs work best in precision-drilled holes.
Flush-Cut After Curing
Wait 24 hours for the adhesive to cure fully, then trim the plug flush with a sharp chisel or oscillating multi-tool. Sand lightly and apply finish.
Pro Tip from Our Deck Specialists
Order plugs cut from the same species AND the same board lot as your decking for the closest color and grain match. Plugs from a different harvest can look noticeably different.
Plugs & Plug Kits — Common Questions
Frequently Bought Together
Accessories that pair well with plugs & plug kits for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455