.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Extreme Plug® Ribbed – Ipe, 350 Ct.
Pack of 350 ribbed 3/8" Ipe Extreme Plugs®. Engineered with concentric rings that compensate for imperfect countersink holes and maximize adhesive grip. Suited for mid-size decking jobs.
Available Options
Choose your preferred options and quantity below.
Standard
PLUGS-EX-IPE-350
$82.75
per unit
About this product
The DeckWise Extreme Plug Ribbed in Ipe is a specialized hardwood fastening accessory designed to conceal face-driven screws in tropical hardwood installations. These plugs solve the aesthetic issue of visible screw heads by providing a seamless, grain-matched finish that blends into the surrounding timber. They are ideal for professional contractors and homeowners building high-end Ipe decks, siding, or outdoor furniture.
Manufacturer Specifications
- Material
- Genuine Ipe Hardwood
- Plug Diameter
- 3/8 inch
- Quantity
- 350 count
- Design Type
- Ribbed and Tapered
- Drying Method
- Kiln-dried
- Compatible Fastener
- Standard #8 or #10 flat head decking screws
Best used for
- 1Concealing face-screws on Ipe deck perimeter boards and picture-frame borders where hidden fasteners are not applicable.
- 2Providing a clean, fastener-free appearance for Ipe rainscreen siding and vertical cladding projects.
- 3Securing Ipe stair treads and handrails to ensure a smooth, snag-free surface for high-traffic residential or commercial docks.
- 4Finishing Ipe site furnishings, such as benches and planters, to protect hardware from corrosive coastal environments.
Pro tips for dense hardwoods
- Always align the grain of the Ipe plug with the grain of the deck board before tapping it in to achieve a nearly invisible finish.
- Use a waterproof exterior wood glue, such as a polyurethane-based adhesive, to ensure the plug remains seated during the natural expansion and contraction of the hardwood.
- Wait for the glue to fully dry before using a flush-cut saw or orbital sander to remove the excess plug material to prevent 'smearing' the wood fibers.
- Apply a UV-inhibiting hardwood oil to the plugs immediately after sanding to match the hydration and color level of the rest of the decking.
Specifications
- Brand
- DeckWise
- Category
- Plugs & Plug Kits
Why Choose Plugs & Plug Kits?
How to Plug a Hardwood Deck
Countersink the Screw
Use a 3/8″ countersink bit to create a flat-bottomed hole roughly 1/4″ deep. The screw sits at the bottom; the plug fills the remaining space.
Apply Exterior Adhesive
Put a small bead of waterproof polyurethane glue (included in kits) into the hole. Too much glue squeezes out and creates a mess; too little and the plug loosens over time.
Seat the Plug
Tap the plug in with a rubber mallet or wood block until it seats against the glue. Ribbed plugs self-center and grip irregular holes; smooth plugs work best in precision-drilled holes.
Flush-Cut After Curing
Wait 24 hours for the adhesive to cure fully, then trim the plug flush with a sharp chisel or oscillating multi-tool. Sand lightly and apply finish.
Pro Tip from Our Deck Specialists
Order plugs cut from the same species AND the same board lot as your decking for the closest color and grain match. Plugs from a different harvest can look noticeably different.
Plugs & Plug Kits — Common Questions
Frequently Bought Together
Accessories that pair well with plugs & plug kits for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455