.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Extreme Plug® Ribbed – Ipe, 100 Ct.
Pack of 100 ribbed 3/8" Ipe Extreme Plugs®. Tolerance-absorbing rings fill oblong countersink holes caused by drill wobble, providing extra surface area for a stronger glue bond. Ideal for small projects or repairs.
Available Options
Choose your preferred options and quantity below.
Standard
PLUGS-EX-IPE-100
$26.00
per unit
About this product
The DeckWise Extreme Plug® Ribbed in Ipe is a specialized wood fastening component designed to hide face-screws in hardwood decking and siding. It utilizes a unique ribbed design to create a high-friction mechanical bond, ensuring plugs remain securely seated even as dense tropical hardwoods undergo natural expansion and contraction. This product is intended for professionals and DIYers who require a clean, fastener-free aesthetic on Ipe surfaces.
Manufacturer Specifications
- Material
- Kiln-dried Ipe Hardwood
- Diameter
- 3/8 inch
- Quantity
- 100 count
- Design Type
- Extreme Plug® (Ribbed and Tapered)
- Compatibility
- Fits 3/8 inch holes drilled with DeckWise Drill & Drive tool
Best used for
- 1Concealing face-screws on the perimeter boards and starter rows of Ipe decks where hidden fasteners are not applicable.
- 2Installing Ipe stair treads and risers to achieve a seamless, furniture-grade finish without visible hardware.
- 3Securing vertical Ipe cladding or rainscreen siding where face-fastening is required for structural integrity.
- 4Hiding fasteners in Ipe railing systems, post wraps, and custom outdoor furniture to maintain a consistent wood-grain appearance.
Pro tips for dense hardwoods
- Always align the wood grain of the plug with the grain of the deck board before tapping it in to make the fastener location virtually invisible.
- Apply a small drop of high-quality exterior waterproof wood glue to the ribs of the plug to ensure a permanent, moisture-resistant seal.
- Use a rubber mallet to seat the plugs slightly above the surface, then allow the glue to cure fully before sanding them flush to prevent glue smears on the surrounding timber.
- After sanding flush, immediately apply a UV-inhibiting hardwood finish to the plugs to prevent them from graying at a different rate than the rest of the board.
Specifications
- Brand
- DeckWise
- Category
- Plugs & Plug Kits
Why Choose Plugs & Plug Kits?
How to Plug a Hardwood Deck
Countersink the Screw
Use a 3/8″ countersink bit to create a flat-bottomed hole roughly 1/4″ deep. The screw sits at the bottom; the plug fills the remaining space.
Apply Exterior Adhesive
Put a small bead of waterproof polyurethane glue (included in kits) into the hole. Too much glue squeezes out and creates a mess; too little and the plug loosens over time.
Seat the Plug
Tap the plug in with a rubber mallet or wood block until it seats against the glue. Ribbed plugs self-center and grip irregular holes; smooth plugs work best in precision-drilled holes.
Flush-Cut After Curing
Wait 24 hours for the adhesive to cure fully, then trim the plug flush with a sharp chisel or oscillating multi-tool. Sand lightly and apply finish.
Pro Tip from Our Deck Specialists
Order plugs cut from the same species AND the same board lot as your decking for the closest color and grain match. Plugs from a different harvest can look noticeably different.
Plugs & Plug Kits — Common Questions
Frequently Bought Together
Accessories that pair well with plugs & plug kits for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455