.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Extreme Plug® Ribbed – Garapa, 350 Ct.
Pack of 350 ribbed 3/8" Garapa Extreme Plugs®. Engineered with concentric rings that compensate for imperfect countersink holes and maximize adhesive grip. Suited for mid-size decking jobs.
Available Options
Choose your preferred options and quantity below.
Standard
PLUGS-EX-GAR-350
$82.75
per unit
About this product
The DeckWise Extreme Plug Ribbed in Garapa is a precision-cut wood plug designed to conceal face-screws in tropical hardwood decking and siding. It features a unique ribbed side profile that creates a high-friction mechanical fit, solving the problem of plugs popping out due to wood expansion and contraction. This 350-count pack is intended for contractors and DIYers seeking a seamless, fastener-free aesthetic on Garapa installations.
Manufacturer Specifications
- Material
- Garapa (Apuleia leiocarpa)
- Quantity
- 350 pieces
- Diameter
- 3/8 inch (9.5mm)
- Design
- Tapered with ribbed sides
- Grain Orientation
- Face grain
- Compatible Drill Bit
- 3/8 inch
Best used for
- 1Concealing face-fasteners on the perimeter boards of a Garapa deck where hidden clips cannot be used.
- 2Achieving a fastener-free aesthetic for Garapa rainscreen siding and vertical cladding applications.
- 3Installing Garapa stair treads or privacy fences where structural face-screwing is required for safety.
- 4Finishing Garapa rooftop decks or boardwalks where high foot traffic requires the durability of face-screws without visible hardware.
Pro tips for dense hardwoods
- Always align the grain of the plug with the grain of the deck board before setting it to make the fastener nearly invisible.
- Apply a small drop of exterior-grade waterproof glue to the side of the plug rather than the bottom of the hole to avoid hydraulic backsplash.
- Use a sharp chisel or a flush-cut saw to remove the excess plug height, then sand lightly to ensure a perfectly level surface with the Garapa board.
- Apply a UV-inhibiting hardwood finish immediately after installation to ensure the plugs and boards age uniformly under sun exposure.
Specifications
- Brand
- DeckWise
- Category
- Plugs & Plug Kits
Why Choose Plugs & Plug Kits?
How to Plug a Hardwood Deck
Countersink the Screw
Use a 3/8″ countersink bit to create a flat-bottomed hole roughly 1/4″ deep. The screw sits at the bottom; the plug fills the remaining space.
Apply Exterior Adhesive
Put a small bead of waterproof polyurethane glue (included in kits) into the hole. Too much glue squeezes out and creates a mess; too little and the plug loosens over time.
Seat the Plug
Tap the plug in with a rubber mallet or wood block until it seats against the glue. Ribbed plugs self-center and grip irregular holes; smooth plugs work best in precision-drilled holes.
Flush-Cut After Curing
Wait 24 hours for the adhesive to cure fully, then trim the plug flush with a sharp chisel or oscillating multi-tool. Sand lightly and apply finish.
Pro Tip from Our Deck Specialists
Order plugs cut from the same species AND the same board lot as your decking for the closest color and grain match. Plugs from a different harvest can look noticeably different.
Plugs & Plug Kits — Common Questions
Frequently Bought Together
Accessories that pair well with plugs & plug kits for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455