.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Extreme Plug® Ribbed – Garapa, 100 Ct.
Pack of 100 ribbed 3/8" Garapa Extreme Plugs®. Tolerance-absorbing rings fill oblong countersink holes caused by drill wobble, providing extra surface area for a stronger glue bond. Ideal for small projects or repairs.
Available Options
Choose your preferred options and quantity below.
Standard
PLUGS-EX-GAR-100
$26.00
per unit
About this product
The DeckWise Extreme Plug® Ribbed in Garapa is a specialized wood fastening accessory designed to conceal face-screws in tropical hardwood installations. These plugs are milled from genuine Garapa to provide a seamless, fastener-free appearance for decking, siding, and outdoor furniture. The ribbed design increases surface area for glue bonding, ensuring the plugs remain securely seated despite the natural expansion and contraction of dense timber.
Manufacturer Specifications
- Material
- Garapa Hardwood (Kiln-Dried)
- Diameter
- 3/8 inch (9.525 mm)
- Plug Type
- Ribbed and Tapered
- Quantity
- 100 count
- Species Compatibility
- Garapa (Light gold/Honey tones)
Best used for
- 1Concealing face-fasteners on Garapa deck stairs and perimeter boards where hidden clips cannot be used.
- 2Achieving a fastener-free aesthetic on Garapa rainscreen siding and vertical cladding installations.
- 3Finishing custom Garapa outdoor cabinetry, benches, or rooftop deck planters to hide hardware.
- 4Patching and repairing existing Garapa boardwalks or docks where screws have been countersunk.
Pro tips for dense hardwoods
- Always align the wood grain of the plug with the grain of the deck board before tapping it into place to ensure the plug becomes nearly invisible once sanded.
- Use a high-quality exterior-grade waterproof wood glue, such as Titebond III, to coat the ribs of the plug for maximum retention in dense hardwoods.
- Allow the glue to cure fully before using a flush-cut saw or belt sander to level the plug; cutting too early can pull the plug or leave a glue ring.
- Apply a UV-inhibiting hardwood oil finish immediately after sanding flush to prevent the plug from weathering at a different rate than the surrounding board.
Specifications
- Brand
- DeckWise
- Category
- Plugs & Plug Kits
Why Choose Plugs & Plug Kits?
How to Plug a Hardwood Deck
Countersink the Screw
Use a 3/8″ countersink bit to create a flat-bottomed hole roughly 1/4″ deep. The screw sits at the bottom; the plug fills the remaining space.
Apply Exterior Adhesive
Put a small bead of waterproof polyurethane glue (included in kits) into the hole. Too much glue squeezes out and creates a mess; too little and the plug loosens over time.
Seat the Plug
Tap the plug in with a rubber mallet or wood block until it seats against the glue. Ribbed plugs self-center and grip irregular holes; smooth plugs work best in precision-drilled holes.
Flush-Cut After Curing
Wait 24 hours for the adhesive to cure fully, then trim the plug flush with a sharp chisel or oscillating multi-tool. Sand lightly and apply finish.
Pro Tip from Our Deck Specialists
Order plugs cut from the same species AND the same board lot as your decking for the closest color and grain match. Plugs from a different harvest can look noticeably different.
Plugs & Plug Kits — Common Questions
Frequently Bought Together
Accessories that pair well with plugs & plug kits for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455