2x4 Cumaru Tongue & Groove Outdoor Flooring board profile diagram
Outdoor Flooring

2x4 Cumaru Tongue & Groove Outdoor Flooring

Engineered for covered porches and protected outdoor spaces, this 2x4 Cumaru Tongue & Groove flooring board leverages Cumaru's 3,540 Janka hardness for a natural lifespan of up to 50+ years. The interlocking tongue and groove profile creates tight, seamless joints for covered porches and outdoor living spaces, with no visible fasteners on the finished surface. In stock and ships nationwide — order Cumaru outdoor flooring online or call 1-844-674-4455 for expert guidance.

2 x 4(1.5"×3.5" actual)[38.1mm × 88.9mm]
Contractor Trusted
Expert Backed
Ships Nationwide
SKU: CUMA-2X4-TG-SB-L1

Configure Your Order

Select profile, grade, and length below to see live pricing

Durable, Slip-Resistant, and Natural Beauty

T&G

Select and Better is our standard grade

Length Guide

Available lengths: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22′

Estimated Shipping Weight
Weight per linear foot:2.55 lbs/LF
1' board:3 lbs

2x4 Cumaru Tongue & Groove Outdoor Flooring — Complete Guide

Everything you need to know about t&g cumaru outdoor flooring

About 2x4 Cumaru Tongue & Groove Outdoor Flooring

Cumaru lumber, characterized by its strength and natural beauty, is an excellent choice for outdoor flooring applications. With its impressive durability, resistance to slip and wear, and aesthetic appeal, Cumaru stands out as a preferred material for patios, balconies, and walkways. The tongue & groove profile of this lumber not only provides a seamless and attractive surface but also facilitates easier installation, ensuring a sturdy and reliable flooring solution.

  • Exceptional durability for outdoor conditions
  • Natural slip resistance enhances safety
  • Tongue & groove profile for straightforward installation

Key Benefits

Durability

Cumaru wood is highly resistant to moisture, decay, and insects, allowing it to withstand the rigors of outdoor conditions without significant wear.

Slip Resistance

The natural texture of Cumaru provides enhanced grip underfoot, making it a safe option for areas that may become slippery when wet.

Aesthetic Appeal

Featuring attractive grain patterns and rich color variations, Cumaru adds a natural beauty that complements outdoor spaces elegantly.

Technical Specifications

Janka Hardness

3330

Density

745 kg/m³ (46.5 lb/ft³)

Durability Rating

High (Class 1 - very durable)

Dimensional Stability

Excellent, minimal shrinkage and swelling

Installation Guide

Difficulty:
Moderate

Key Tips:

  • Ensure proper substructure support for the 2x4 nominal (1.5x3.5 actual) boards
  • Allow for expansion spacing between boards to accommodate moisture variations
  • Plan for drainage and ventilation under the flooring to prevent moisture buildup

Recommended Tools:

Drill
Saw (circular or miter)
Fasteners suitable for outdoor use (stainless steel recommended)

Maintenance & Care

Cleaning

Regularly sweep away debris and clean with a mild detergent and water solution to maintain the wood's appearance.

Finishing

Apply a UV-protective finish annually to enhance longevity and maintain color.

Weathering

Cumaru naturally ages to a silvery patina if left untreated, though a protective finish can preserve the original hue.

Frequently Asked Questions

A 2x4 Cumaru board weighs approximately 2.55 lbs per linear foot. Cumaru has a density of about 68 lbs/ft³, making it one of the densest commercially available hardwoods. Always factor weight into your structural and shipping calculations.

Yes — Cumaru is rated Durability Class 1 (Very Durable) and is naturally resistant to rot, decay, insects, and fungal attack without chemical treatment. It is Class B fire-rated and performs exceptionally well in full exterior exposure including outdoor flooring applications. While ground contact is possible, we recommend elevating Cumaru boards at least 6" above grade for maximum lifespan.

Cumaru outperforms composite in hardness (3,540 vs ~200 Janka), lifespan (up to 50+ years vs 25-30 years), and heat resistance. Unlike composites, Cumaru won't melt, warp in extreme heat, or fade significantly. While initial cost is similar ($8-15/LF installed), Cumaru costs less over its much longer lifetime. Composites do offer lower upfront maintenance.

Cumaru requires minimal maintenance. Without treatment, it naturally weathers to an elegant silver-gray patina over 6-12 months. To maintain the original warm brown color, apply a UV-inhibiting penetrating oil (like Ipe Oil or Penofin) once or twice annually. Cleaning involves periodic washing with a mild soap solution. No sanding, staining, or sealing is required for structural durability.

Cumaru is DIY-friendly with proper preparation. Key requirements: (1) Always pre-drill all screw holes — Cumaru is too hard for direct screwing. (2) Use only 305 or 316 stainless steel fasteners — standard hardware will corrode and stain. (3) Face-screw with stainless steel trim-head screws. (4) Allow boards to acclimate on-site for 5-7 days before installation. A compound miter saw with a carbide-tipped blade is recommended.

A nominal 2x4 Cumaru board has actual finished dimensions of 1.5" × 3.5" (38.1 x 88.9 mm). The "2x4" is the nominal (rough-cut) size — after kiln drying and precision surfacing, all hardwood lumber finishes slightly smaller. This is standard across the lumber industry, similar to how a nominal 2×4 softwood measures 1.5" × 3.5". Always use the actual dimensions (1.5" × 3.5") when calculating material quantities and coverage for your project.

We responsibly, legally, and ethically source all our Cumaru. We work only with suppliers who follow responsible forestry practices with full chain-of-custody transparency. Note: We are not FSC certified. Cumaru trees grow naturally in diverse tropical forests and regenerate well under managed harvest. The extremely long lifespan (up to 50+ years) means fewer replacements compared to softwood or composite alternatives, reducing long-term environmental impact.

Shipping & Delivery

Nationwide delivery: We ship to all 50 states via LTL freight, flatbed, or terminal pickup

Typical lead time: 5-10 business days for standard orders (custom milling may add 2-3 weeks)

Shipping estimate: Final freight cost calculated at checkout based on your location and order size

Rush service available: Contact us for expedited milling and shipping options