.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Wood Plug Starter Kit
Kit Contents
25 plugs + 25 #8x2"" screws
Select Wood Type
Choose your preferred species and quantity below.
Cumaru
25 Kit
PLUGS-CUM-SP25
$8.95
per unit
Ipe
25 Kit
PLUGS-IPE-SP25
$10.95
per unit
Teak
25 Kit
PLUGS-TEA-SP25
$8.95
per unit
Thermo Ash
25 Kit
PLUGS-THE-SP25
$8.95
per unit
Garapa
25 Kit
PLUGS-GAR-SP25
$8.95
per unit
Massaranduba
25 Kit
PLUGS-MAS-SP25
$8.95
per unit
Thermo Red Oak
25 Kit
PLUGS-THE-SP25
$8.95
per unit
Red Balau
25 Kit
PLUGS-RED-SP25
$8.95
per unit
Thermo Pine
25 Kit
PLUGS-THE-SP25
$8.95
per unit
Tigerwood
25 Kit
PLUGS-TIG-SP25
$8.95
per unit
Yellow Balau
25 Kit
PLUGS-YEL-SP25
$8.95
per unit
About this product
The DeckWise Wood Plug Starter Kit is a professional-grade solution for concealing face-screws in high-end tropical hardwood installations. It provides species-matched, face-grain plugs that allow contractors and DIYers to achieve a seamless, fastener-free aesthetic on stairs, railings, and perimeter boards. This kit solves the problem of visible hardware in dense timber where hidden fastener clips cannot be applied.
Manufacturer Specifications
- Plug Diameter
- 3/8 inch (9.525 mm)
- Plug Construction
- Tapered Face-Grain
- Material Variants
- Ipe, Cumaru, Tigerwood, Garapa, Massaranduba, Red Balau, Teak, Thermo Ash, Thermo Pine
- Package Quantity
- 25 Plugs per pack (SP25 SKUs)
- Recommended Adhesive
- Waterproof Wood Glue (e.g., Titebond III)
Best used for
- 1Concealing fasteners on the first and last boards of an Ipe deck where side-groove hidden fasteners are not applicable.
- 2Securing vertical Tigerwood siding or cladding to maintain a monolithic wood appearance without visible screw heads.
- 3Finishing Garapa or Massaranduba handrails and stair treads to ensure a smooth, splinter-free surface for residential or commercial use.
- 4Performing localized repairs or board replacements on Cumaru boardwalks where existing fastener holes must be hidden to match the original installation.
Pro tips for dense hardwoods
- Always align the wood grain of the plug with the wood grain of the deck board before setting to make the plug virtually invisible.
- When working with dense hardwoods like Ipe, allow the wood glue to cure fully before using a sharp chisel or flush-cut saw to remove the excess plug material.
- Avoid using excessive glue; a small drop on the side of the plug is sufficient to prevent hydraulic back-pressure from pushing the plug out of the hole.
Specifications
- Brand
- DeckWise
- Category
- Plugs & Plug Kits
- Options available
- 11 sizes / package counts
- Kit contents
- 25 plugs + 25 #8x2"" screws
Per-option details
| Option | SKU | Piece count | Dimensions | Weight |
|---|---|---|---|---|
| Cumaru | PLUGS-CUM-SP25 | 25 Kit | — | — |
| Ipe | PLUGS-IPE-SP25 | 25 Kit | — | — |
| Teak | PLUGS-TEA-SP25 | 25 Kit | — | — |
| Thermo Ash | PLUGS-THE-SP25 | 25 Kit | — | — |
| Garapa | PLUGS-GAR-SP25 | 25 Kit | — | — |
| Massaranduba | PLUGS-MAS-SP25 | 25 Kit | — | — |
| Thermo Red Oak | PLUGS-THE-SP25 | 25 Kit | — | — |
| Red Balau | PLUGS-RED-SP25 | 25 Kit | — | — |
| Thermo Pine | PLUGS-THE-SP25 | 25 Kit | — | — |
| Tigerwood | PLUGS-TIG-SP25 | 25 Kit | — | — |
| Yellow Balau | PLUGS-YEL-SP25 | 25 Kit | — | — |
Piece counts and dimensions are as supplied by the manufacturer for each package option.
Why Choose Plugs & Plug Kits?
How to Plug a Hardwood Deck
Countersink the Screw
Use a 3/8″ countersink bit to create a flat-bottomed hole roughly 1/4″ deep. The screw sits at the bottom; the plug fills the remaining space.
Apply Exterior Adhesive
Put a small bead of waterproof polyurethane glue (included in kits) into the hole. Too much glue squeezes out and creates a mess; too little and the plug loosens over time.
Seat the Plug
Tap the plug in with a rubber mallet or wood block until it seats against the glue. Ribbed plugs self-center and grip irregular holes; smooth plugs work best in precision-drilled holes.
Flush-Cut After Curing
Wait 24 hours for the adhesive to cure fully, then trim the plug flush with a sharp chisel or oscillating multi-tool. Sand lightly and apply finish.
Pro Tip from Our Deck Specialists
Order plugs cut from the same species AND the same board lot as your decking for the closest color and grain match. Plugs from a different harvest can look noticeably different.
Plugs & Plug Kits — Common Questions
Frequently Bought Together
Accessories that pair well with plugs & plug kits for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455