.png?width=180&quality=75&format=webp){kind=logo}
Wood Brightener (Part 2) 32 oz
Concentrated powder
Available Options
Choose your preferred options and quantity below.
32 oz
WD-BRT-PRT2-32
$34.95
per unit
About this product
DeckWise Wood Brightener (Part 2) is a concentrated acidic powder designed to neutralize wood pH and restore the natural color of tropical hardwoods. It is specifically formulated to remove tannin stains, rust spots, and the graying effects of weathering, preparing the wood surface for a fresh coat of oil finish. This product is an essential second step for contractors and homeowners performing a deep restoration of high-density decking.
Manufacturer Specifications
- Container Size
- 32 oz powder concentrate
- Coverage Rate
- Approximately 600-800 sq. ft. per 32 oz container
- Mixing Ratio
- 1 cup of powder per 1 gallon of water
- Primary Active Ingredient
- Oxalic Acid
- Application Temperature
- 50°F to 90°F (10°C to 32°C)
- Dwell Time
- 10 to 15 minutes
Best used for
- 1Neutralizing pH levels on Ipe and Cumaru decks after a heavy cleaning or stripping process to prevent finish failure.
- 2Removing black tannin spots and iron stains from Tigerwood or Garapa siding caused by metal contact or environmental exposure.
- 3Brightening the appearance of weathered Massaranduba or Red Balau boardwalks to restore the wood's original vibrant red or brown tones.
- 4Pre-treating new tropical hardwood fencing to open the grain and ensure deep penetration of UV-protectant oils.
Pro tips for dense hardwoods
- Apply the brightener to the wood while it is still damp from the cleaning phase to facilitate even absorption into the dense grain of tropical species.
- For stubborn rust stains on dense hardwoods, a slightly stronger concentration may be used in a localized area, followed by immediate thorough rinsing.
- Always allow the wood to dry for at least 24 to 48 hours after brightening before applying a finish like Ipe Oil to ensure the moisture content is low enough for proper bonding.
Specifications
- Brand
- DeckWise
- Category
- Stains & Finishes
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455