.png?width=180&quality=75&format=webp){kind=logo}
Ipe Seal End Grain Seal 5 Gal
Low-VOC wax emulsion
Available Options
Choose your preferred options and quantity below.
5 Gal
IPE-SL-5-GAL
$171.99
per unit
About this product
DeckWise Ipe Seal is a specialized water-based wax emulsion designed to prevent end-checking and splitting in high-density tropical hardwoods. By creating a breathable moisture barrier on fresh end cuts, it controls the rate of moisture loss to ensure timber dries evenly and maintains structural integrity. This product is essential for professionals and homeowners installing premium hardwood structures like decks, docks, and cladding.
Manufacturer Specifications
- Container Size
- 5 Gallons
- Material Type
- Water-based wax emulsion
- VOC Content
- Less than 100 g/l
- Coverage Rate
- Approximately 500 sq. ft. of decking (end cuts) per gallon
- Minimum Application Temperature
- 40°F (4.4°C)
- Drying Time
- 1-2 hours depending on humidity
- Flash Point
- Non-flammable
Best used for
- 1Sealing the fresh-cut ends of Ipe or Massaranduba boards during the construction of high-traffic boardwalks to prevent structural cracking.
- 2Protecting vertical end-grain joints in Garapa or Cumaru rain-screen siding installations to ensure a tight, stable fit over time.
- 3Treating the exposed ends of Tigerwood or Red Balau fencing pickets to maintain a premium aesthetic and prevent splintering.
- 4Applying to the structural posts and joists of tropical hardwood rooftop decks where extreme UV and wind exposure accelerate drying.
Pro tips for dense hardwoods
- Apply the sealer as soon as possible after making a cross-cut, ideally within the same hour, to lock in moisture before the grain begins to open.
- Use a small brush to apply the emulsion precisely to the end grain; avoid getting the product on the face of the board as it can interfere with the penetration of subsequent oil finishes.
- If any sealer accidentally drips onto the board face, wipe it away immediately with a damp cloth before it dries to prevent a waxy residue.
- Store the container in a temperature-controlled environment and do not allow the liquid to freeze, as this can break the wax emulsion.
Specifications
- Brand
- DeckWise
- Category
- Stains & Finishes
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455