.png?width=180&quality=75&format=webp){kind=logo}
Not the actual product photo. Real product photography coming soon. Specifications and pricing below are accurate.
Deck Ice-Melt with Wand
Non-toxic
Available Options
Choose your preferred options and quantity below.
1 Gal
DW-ICE-1-GAL-WD
$34.95
per unit
About this product
DeckWise Deck Ice-Melt is a specialized liquid de-icing solution designed to remove and prevent ice accumulation on high-end wood surfaces without the damage caused by traditional salts. It provides a non-corrosive and non-staining alternative for homeowners and contractors looking to maintain the aesthetic integrity of exotic hardwood decking during winter months. This product includes a convenient spray wand to ensure even application and precise coverage on walkways, stairs, and deck boards.
Manufacturer Specifications
- Container Size
- 1 Gallon
- Coverage Rate
- 500 to 1,000 square feet per gallon depending on ice thickness
- Minimum Operating Temperature
- -20°F (-29°C)
- Formula Type
- Liquid, Chloride-Free
- Application Method
- Spray wand (included)
- Compatibility
- Ipe, Cumaru, Tigerwood, Garapa, Massaranduba, Red Balau, Composite, and PVC
Best used for
- 1Preventing ice bond formation on Ipe rooftop decks where traditional salt runoff could damage building drainage systems.
- 2Clearing slippery frost from Cumaru or Garapa stairs and walkways to ensure pedestrian safety without scratching the wood surface.
- 3Maintaining winter accessibility on Massaranduba or Red Balau boardwalks located near sensitive marine environments where salt is prohibited.
- 4Pre-treating Tigerwood decking before a predicted snowstorm to facilitate easier snow removal with a plastic shovel.
Pro tips for dense hardwoods
- For best results, apply the solution as an 'anti-icer' before a storm begins to prevent snow and ice from bonding to the dense surface of tropical hardwoods.
- Always use a plastic-edged shovel rather than metal when clearing snow from Ipe or Cumaru to avoid gouging the wood or damaging the UV-protective oil finish.
- Although the formula is non-staining, it is a best practice to rinse the deck with water in the spring to ensure a clean surface before applying a fresh coat of Ipe Oil or similar hardwood finish.
Specifications
- Brand
- DeckWise
- Category
- Stains & Finishes
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455