.png?width=140&quality=70){kind=logo}
How Much Does Cumaru Siding Cost Installed?
2026 guide to Cumaru (Brazilian Teak) siding costs — shiplap, rainscreen, and T&G profiles priced per square foot with regional labor rates.
$16–$38
per sq ft installed
$6–$13
material only / SF
75+
year Ipe lifespan
Cumaru Siding Cost Installed — Quick Answer
The total cost is $16 to $38 per square foot fully installed in 2026, depending on your location, project complexity, and contractor experience. Material alone runs $6–$13/SF. Labor rates vary significantly by region — from $35/hr in lower-cost areas to $150/hr in major metro markets like San Francisco and New York City.
Compare Material Costs by Species
Live material pricing from our catalog. Select a species to see how it affects total installed cost for your siding.
Material Cost
$18–$18
per sq ft (from our catalog)
Total Installed Estimate
$28–$45
per sq ft (material + labor)
Ipe Lifespan
Up to 75+
years · Janka 3,680 lbf
| Board Size | Profile | Price/LF | Price/SF |
|---|---|---|---|
| Ipe 1x6 | Shiplap | $8.25 | $18.00 |
| Ipe 1x6 | T&G | $8.25 | $18.00 |
Siding Cost Breakdown
Here's where your money goes when building your siding. Each component contributes to the total installed price per square foot.
Cumaru Siding Material
$6–$13/SF
Shiplap, rainscreen, or T&G. 1x6 shiplap is the most cost-effective.
Furring & Moisture Barrier
$2–$4/SF
Rain screen furring, house wrap, and flashing.
Stainless Fasteners
$1–$2/SF
Stainless steel finish nails or screws.
Installation Labor
$8–$18/SF
Vertical cladding installation. Scaffolding adds $2–$5/SF for upper stories.
Siding Installation Labor Costs by Region
Contractor rates for hardwood siding installation vary significantly by region. Here's what to expect across the U.S.
San Francisco, NYC, Boston, Seattle, LA, DC
Contractor rate
$75–$150/hr
Total installed/SF
$22–$40
Denver, Austin, Portland, Miami, Chicago, San Diego
Contractor rate
$55–$100/hr
Total installed/SF
$19–$33
Atlanta, Phoenix, Dallas, Nashville, Raleigh, Charlotte
Contractor rate
$45–$80/hr
Total installed/SF
$17–$30
Houston, Tampa, Indianapolis, Kansas City, Oklahoma City
Contractor rate
$35–$65/hr
Total installed/SF
$16–$27
Note: Rates above reflect general contractor pricing for experienced hardwood installers. Ipe requires specialized skills — pre-drilling, carbide tooling, and heavier handling — so rates are typically 15–25% higher than softwood or composite installation. Always get 3+ quotes from contractors with tropical hardwood experience.
Real-World Siding Cost Examples
Here's what real projects typically cost based on size and location. Use these as a ballpark for your budget.
Accent Wall
200 SF · Single story
fully installed
Feature wall on front elevation. Popular modern design element.
Garage/ADU Siding
500 SF · Single story
fully installed
Full exterior cladding on a detached garage or ADU.
Full Home Exterior
2,000 SF · Two story
fully installed
Complete home siding with Cumaru rainscreen. Includes scaffolding.
Why Choose This Species for Your Siding?
50+ year lifespan eliminates siding replacement cycles
3,540 Janka hardness — extreme impact and dent resistance
Class A fire rating — meets strict fire codes
15–25% less expensive than Ipe siding with comparable performance
Rich warm brown tones — similar appearance to Ipe
No painting or staining required
Available in shiplap, rainscreen, and T&G profiles
Best value-to-performance ratio for hardwood siding
While premium hardwood costs more upfront than cedar, pressure-treated pine, or composite, the decades-long lifespan means you'll likely never replace it. Over 50 years, the lifecycle cost is often lower than materials that need replacement every 10–20 years.
Cumaru Siding: Premium Cladding at a Better Price
Cumaru siding delivers Ipe-like performance at 15–25% less cost. Its 3,540 Janka hardness provides exceptional impact resistance — important for exterior cladding exposed to wind-blown debris, hail, and everyday wear.
For profiles and material pricing, browse our Cumaru siding page or see all hardwood siding options.
Frequently Asked Questions
Pricing Disclaimer
All costs on this page are estimates based on national averages and are provided for general budgeting purposes only. They are not quotes and do not constitute an offer or guarantee of pricing. Actual costs vary significantly based on your geographic location, project complexity, site conditions, material selections, contractor experience, and current market rates.
Contractor rates span a wide range. You may find less experienced installers who charge below the ranges shown — but Ipe is an extremely dense hardwood that requires specialized skills, carbide tooling, and pre-drilling. Hiring someone without tropical hardwood experience can result in costly mistakes, material waste, and a finished product that doesn't perform to its potential. Conversely, a world-class craftsman with decades of hardwood experience may charge above the ranges shown, and the quality of their work is often worth the premium.
Labor rates are influenced by local cost of living, seasonal demand, contractor availability, union vs. non-union markets, and the complexity of your specific project (elevation, stairs, curves, railing, access constraints, etc.). Regional ranges shown are illustrative and may not reflect current conditions in your area.
We strongly recommend getting at least three written quotes from contractors with verified tropical hardwood installation experience. Ipe Woods USA provides material only — we do not perform installation and are not responsible for labor pricing or contractor selection. Always verify contractor licensing, insurance, and references before hiring.
Shop Siding Lumber by Species
Browse sizes, profiles, and live pricing for your siding project.