5/4x6 Cumaru Tongue & Groove Outdoor Flooring board profile diagram
Outdoor Flooring

5/4x6 Cumaru Tongue & Groove Outdoor Flooring

Engineered for covered porches and protected outdoor spaces, this 5/4x6 Cumaru Tongue & Groove flooring board leverages Cumaru's 3,540 Janka hardness for a natural lifespan of up to 50+ years. The interlocking tongue and groove profile creates tight, seamless joints for covered porches and outdoor living spaces, with no visible fasteners on the finished surface. In stock and ships nationwide — order Cumaru outdoor flooring online or call 1-844-674-4455 for expert guidance.

5/4 x 6(1"×5.5" actual)[25.4mm × 139.7mm]
Contractor Trusted
Expert Backed
Ships Nationwide
SKU: CUMA-54X6-TG-SB-L1

Configure Your Order

Select profile, grade, and length below to see live pricing

T&G

Select and Better is our standard grade

Length Guide

Available lengths: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22′

Estimated Shipping Weight
Weight per linear foot:2.67 lbs/LF
1' board:3 lbs

5/4x6 Cumaru Tongue & Groove Outdoor Flooring — Complete Guide

Everything you need to know about t&g cumaru outdoor flooring

About 5/4x6 Cumaru Tongue & Groove Outdoor Flooring

Cumaru lumber is an exceptional choice for outdoor flooring due to its remarkable durability, natural slip resistance, and outstanding performance in diverse weather conditions. The tongue & groove profile enhances both installation efficiency and the visual appeal of the surface. This profile allows for a seamless fit, creating a smooth, continuous flooring surface that is not only aesthetically pleasing but also functional, ensuring that rainwater effectively drains away without pooling.

  • High durability and resistance to environmental elements.
  • Natural slip resistance ideal for outdoor applications.
  • Tongue & groove profile facilitates easy installation and enhances appearance.

Key Benefits

Exceptional Durability

Cumaru's natural properties make it resistant to wear from foot traffic, decay, and insect damage, ensuring a long-lasting floor.

Safety Underfoot

Its inherent slip resistance helps to provide a safe surface, reducing the risk of slips and falls, especially when wet.

Low Maintenance

Requires minimal maintenance to preserve its beauty and durability, keeping outdoor areas attractive with little effort.

Technical Specifications

Janka Hardness

3330

Density

approximately 56 lbs/ft³

Durability Rating

Class 1 (highest durability rating)

Dimensional Stability

Excellent dimensional stability, minimally affected by humidity changes.

Frequently Asked Questions

A 5/4x6 Cumaru board weighs approximately 2.67 lbs per linear foot. Cumaru has a density of about 68 lbs/ft³, making it one of the densest commercially available hardwoods. Always factor weight into your structural and shipping calculations.

Yes — Cumaru is rated Durability Class 1 (Very Durable) and is naturally resistant to rot, decay, insects, and fungal attack without chemical treatment. It is Class B fire-rated and performs exceptionally well in full exterior exposure including outdoor flooring applications. While ground contact is possible, we recommend elevating Cumaru boards at least 6" above grade for maximum lifespan.

Cumaru outperforms composite in hardness (3,540 vs ~200 Janka), lifespan (up to 50+ years vs 25-30 years), and heat resistance. Unlike composites, Cumaru won't melt, warp in extreme heat, or fade significantly. While initial cost is similar ($8-15/LF installed), Cumaru costs less over its much longer lifetime. Composites do offer lower upfront maintenance.

Cumaru requires minimal maintenance. Without treatment, it naturally weathers to an elegant silver-gray patina over 6-12 months. To maintain the original warm brown color, apply a UV-inhibiting penetrating oil (like Ipe Oil or Penofin) once or twice annually. Cleaning involves periodic washing with a mild soap solution. No sanding, staining, or sealing is required for structural durability.

Cumaru is DIY-friendly with proper preparation. Key requirements: (1) Always pre-drill all screw holes — Cumaru is too hard for direct screwing. (2) Use only 305 or 316 stainless steel fasteners — standard hardware will corrode and stain. (3) Face-screw with stainless steel trim-head screws. (4) Allow boards to acclimate on-site for 5-7 days before installation. A compound miter saw with a carbide-tipped blade is recommended.

A nominal 5/4x6 Cumaru board has actual finished dimensions of 1" × 5.5" (25.4 x 139.7 mm). The "5/4x6" is the nominal (rough-cut) size — after kiln drying and precision surfacing, all hardwood lumber finishes slightly smaller. This is standard across the lumber industry, similar to how a nominal 2×4 softwood measures 1.5" × 3.5". Always use the actual dimensions (1" × 5.5") when calculating material quantities and coverage for your project.

We responsibly, legally, and ethically source all our Cumaru. We work only with suppliers who follow responsible forestry practices with full chain-of-custody transparency. Note: We are not FSC certified. Cumaru trees grow naturally in diverse tropical forests and regenerate well under managed harvest. The extremely long lifespan (up to 50+ years) means fewer replacements compared to softwood or composite alternatives, reducing long-term environmental impact.

Shipping & Delivery

Nationwide delivery: We ship to all 50 states via LTL freight, flatbed, or terminal pickup

Typical lead time: 5-10 business days for standard orders (custom milling may add 2-3 weeks)

Shipping estimate: Final freight cost calculated at checkout based on your location and order size

Rush service available: Contact us for expedited milling and shipping options