.png?width=140&quality=70){kind=logo}
Ipe Clip® Extreme®
The flagship DeckWise® hidden deck fastener with a patented stainless steel insert for up to 3× the hold-down strength of competing clips. Built-in spacer legs set a consistent 3/32″ (Shadowline) gap — ideal for air-dried exotic hardwoods.
Gap Spacing
3/32" (2.4 mm)
"Shadowline" spacing profile
Key Features
- Patented hardened stainless steel insert molded into UV-resistant polypropylene
- 3/32″ automatic gap spacing (Shadowline)
- Edge-mount, top-side installation — no under-deck access needed
- Available in Black, Brown & Grey to match your decking
- Covers ~100 sq ft per 175-ct kit
Kit Contents
1050 clips, 1150 #8x2" SS screws
Installation Tip
Insert the clip into the board groove, drive the screw at 45°, then slide the next board in. The built-in spacer legs set the gap automatically — no measuring needed.
Maximum value for large commercial and residential deck installations. The Ipe Clip® Extreme® 1050-count contractor bucket covers approximately 600 square feet of decking with 1050 hidden fasteners and 1150 stainless steel screws. Features the patented stainless steel insert design for unmatched holding power. Consistent 3/32" gap spacing throughout. Ideal for deck builders, contractors, and multi-deck projects. Pallet quantities available: 48 cases per pallet (48"x40"x60", 1,566 lbs). Black clips for air-dried exotic hardwoods.
Select Quantity
Choose your preferred package size and quantity below.
100 count
100 Kit
ICEX-SBL-100
5" x 7" x 3" • 2.3 lbs
$93.42
per unit
100 Kit
ICEX-SBR-100
5" x 7" x 3" • 2.3 lbs
$93.42
per unit
100 Kit
ICEX-SGR-100
5" x 7" x 3" • 2.3 lbs
$93.42
per unit
175 count
175 Kit
ICEX-SBR-175
9" x 7" x 3" • 4 lbs
$152.70
per unit
175 Kit
ICEX-SBL-175
9" x 7" x 3" • 4 lbs
$152.70
per unit
175 Kit
ICEX-SGR-175
9" x 7" x 3" • 4 lbs
$152.70
per unit
525 count
525 Bucket
ICEX-SBL-525
9.7" x 9.7" x 8" • 12 lbs
$449.45
per unit
525 Kit
ICEX-SBL-525
9.7" x 9.7" x 8" • 12 lbs
$449.45
per unit
525 Kit
ICEX-SBR-525
449.45 • 324.56
$449.45
per unit
525 Kit
ICEX-SGR-525
449.45 • 324.56
$449.45
per unit
1050 count
1050 Bucket
ICEX-SBL-1050
12.5" x 12.5" x 15" • 25 lbs
$899.40
per unit
1050 Bucket
ICEX-SBL-1050
12.5" x 12.5" x 15" • 25 lbs
$899.40
per unit
1050 Bucket
ICEX-SBR-1050
899.4 • 518.63
$899.40
per unit
1050 Bucket
ICEX-SGR-1050
899.4 • 518.63
$899.40
per unit
Why Choose Hidden Fasteners?
How Hidden Fasteners Work on Hardwood Decks
Pre-Groove the Boards
Hidden fasteners require a slot machined into the edge of each board. Most boards from Ipe Woods USA ship pre-grooved, or you can route the slot on-site with a 1/8″ slotting cutter.
Set the First Board
Secure your starter board to the joist with a face screw near the house-side edge. This first board anchors the rest of the field and will be covered by trim.
Clip, Screw, Slide
Insert the clip into the board groove, drive the supplied screw through the clip into the joist at roughly 45°, then slide the next board onto the exposed clip tab. The built-in spacer legs set the gap automatically.
Repeat Across the Deck
Continue across the deck, one board at a time. Each clip grips the outgoing board while spacing the incoming one — no measuring or shimming needed.
Pro Tip from Our Deck Specialists
In hot weather, tighten clips snugly but not crushing-tight. Exotic hardwoods expand and contract with moisture changes, and the clip must allow sideways movement to prevent buckling.
Hidden Fasteners — Common Questions
Frequently Bought Together
Accessories that pair well with hidden fasteners for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455