
Superdeck Premium Translucent Wood Finish - 7400 Series
Superdeck 7400 Series Premium Translucent Wood Finish combines alkyd resins with a dual-oil system to create a hard yet flexible coating that won't peel or crack. Specifically formulated for vertical wood surfaces—log homes, siding, trim, and doors—where dripping and sagging are common problems with lesser products. Delivers a translucent finish that preserves the wood's natural appearance with lasting weather protection. Limited availability—please call to verify inventory before ordering.
Available Options
Choose your preferred options and quantity below.
1 Gallon
SD-7400
$49.99
per unit
Why Choose Stains & Finishes?
How to Finish Exotic Hardwood Decking
Wait for Acclimation
Let freshly installed boards acclimate for 2-4 weeks before applying finish. This allows the wood to reach equilibrium moisture and the pores to open slightly for better oil penetration.
Clean and Brighten
Apply a wood cleaner/brightener to remove mill glaze, dirt, and oxidation. Rinse thoroughly and let the deck dry for 24-48 hours before oiling.
Apply Penetrating Oil
Brush or pad a generous coat of penetrating oil (like Ipe Oil® or UV Plus) along the grain. Let the oil soak in for 15-20 minutes, then wipe off any excess that hasn't been absorbed.
Seal All End Cuts
End grain absorbs and releases moisture 10-12× faster than face grain. Seal every cut end with end grain sealer within 24 hours of cutting to prevent checking and splitting.
Pro Tip from Our Deck Specialists
Dense hardwoods reject film-forming stains and polyurethanes — these will peel within months. Always use a penetrating oil formula designed for tropical species.
Stains & Finishes — Common Questions
Frequently Bought Together
Accessories that pair well with stains & finishes for a complete installation.
Ships Nationwide
Fast LTL freight delivery
Quality Guaranteed
Professional-grade products
In Stock
Ready to ship today
Expert Support
Call 1-844-674-4455
.png?width=140&quality=70)